HOTON MAGNETIC PRODUCTS FACTORY
   
   

MAGNETIC PRODUCT
  Magnetic Material Series
 
  Pot Magnet Series
 
  Magnetic Separator Series
 
  Practical Industrial Tools Series
 
  Other Magnetic Application
 
LASER CUTTING
  Laser Cutting
 
WOODEN CRATES
  Wooden Plywood Crates
 

 

PRODUCT > MAGNETIC SEPARATOR > Magnetic Bar

Magnetic tube are a simple low cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing,According to the environment of your product,These magnetic filter bars can be made with Alnico, Ceramic or Rare Earth magnet material. they can be easily installed into machinery or assembled according to the wishes of the customers. Encased in either 304 or 316 stainless steel tubes 25.4mm diameter, we offer them with either standard ferrite magnets or high intensity rare earth magnets (up to 12,000 gauss). We manufacture them specifically to the length requested by the customer.

ROUND SERIES
ITEM NO. DIA (inch) LENGTH (inch) ITEM NO. DIA (inch) LENGTH (inch)
MT.004 1" 4" MT.024 1" 24"
MT.006 1" 6" MT.026 1" 26"
MT.008 1" 8" MT.028 1" 28"
MT.010 1" 10" MT.030 1" 30"
MT.012 1" 12" MT.032 1" 32"
MT.014 1" 14" MT.034 1" 34"
MT.016 1" 16" MT.036 1" 36"
MT.018 1" 18" MT.038 1" 38"
MT.020 1" 20" MT.040 1" 40"
MT.022 1" 22" MT.050 1" 50"
SQUARE SERIES
ITEM NO. A * B (inch) LENGTH (inch) ITEM NO. A * B (inch) LENGTH (inch)
MS.004 1" X 1" 4" MS.2.004 2" X 2 " 4"
MS.008 1" X 1" 8" MS.2.008 2" X 2 " 8"
MS.012 1" X 1" 12" MS.2.012 2" X 2 " 12"
MS.016 1" X 1" 16" MS.2.016 2" X 2 " 16"
MS.020 1" X 1" 20" MS.2.020 2" X 2 " 20"
MS.024 1" X 1" 24" MS.2.024 2" X 2 " 24"
MS.028 1" X 1" 28" MS.2.028 2" X 2 " 28"
MS.032 1" X 1" 32" MS.2.032 2" X 2 " 32"
MS.036 1" X 1" 36" MS.2.036 2" X 2 " 36"
MS.040 1" X 1" 40" MS.2.040 2" X 2 " 40"
 
PRODUCT SPECIFICAL
1. For round magnetic filter bar, we have Diameter 0.5", 0.75", 1", 1.25", 1.5", 1.75", ?2", 3", 4" for your choice. But the most common diameter is 1". Standard tube lengths range from 3" to 60" long. Square magnetic bars can be provided on request.
2. Constructed of 304 & 316 casing tube, it is equipped with high density Ceramic 8 magnets and high-energy Rare-earth magnets to suit your application. You can build or modify your own magnetic separation equipment with individual magnetic filter bar.
3. Magnetic strength from 1500-12000 Gauss can be asked as per your requirements.For normal magnetic bar equipped with Ceramic magnets, which could give typical peak value of more than 3,000 Gauss on the surfaces, and could be used up to temperatures of 150 For normal magnetic bar equipped with Rare-earth magnets, which could give typical peak value of more than 12,000 Gauss on the surfaces.
4. Fully seal welded with either plain ends or tapped ends to suit your application.
5. All of magnetic bars are waterproof.
6. Condition: Well polished.
Customer Designed are also welcomed.

 

LASER CUTTING
HOTON has provided a laser cutting service for 6 years.  With short lead times, zero tooling costs and optimum material utilization, laser cutting provides......
Read More...
PLYWOOD CRATE
 
 
HOTON can offer a widely plywood boxes and shipping crates . These range from smaller one-unit solutions to larger solutions with up to six separate pieces......

Read More...

CONTACT US
 
HOTON MAGNETICS
Add:Buliding 2#,waiduan industrial area,zhonghe street,yinzhou,ningbo

Tel: +86-574-8824 0497
Fax: +86-574-8824 2312